Categories

False alarms and system glitches can be frustrating, and even worse, may prevent your home security system from doing its job effectively. Thankfully, most problems, from false alarms to dead batteries, are easy to fix. Explore our tips for troubleshooting your home alarm system in Jefferson City. We’ll help you keep your family members protected and your system operating as it should.

Test Your Home Security System In Jefferson City

One effective way to troubleshoot your home’s security is to test it! Modern systems have a test mode so you don’t by accident prompt an emergency response. After moving to test mode, follow these steps:

• Activate your system as you typically would when you exit your home.
• Open a window or door that uses a contact sensor, or try to trip another sensor. Shut the door or window so it doesn’t prompt the alarm when you get out of test mode.
• Let the alarm resonate for 60 seconds to ensure communications with the security company and to produce an entry in the alarm activity log.
• Continue testing equipment as needed
• Review the alarm’s activity log to verify functionality.

Rest assured, monitoring specialists can tell that your alarm system is being tested. Just make sure to switch off test mode when complete. It’s wise to test once a month or whenever you change your home’s phone or internet provider.

Check The Position And Condition Of Motion Detectors

Although an integral part of your alarm system, motion detectors are notorious for false alarms. Prevent them with some basic troubleshooting.

• Conduct a visual inspection. Are there objects that could move within the sensor’s detection zone, like a window treatment blown in a breeze?
• Is the sensor dirty? Grime, dirt, and cobwebs can lead to poor performance. Check to confirm the device is clean.
• Does the motion detector offer pet immunity you can activate? Some can be set to disregard pets up to 100 pounds.
• When was the battery last replaced? A nearly depleted battery might impact performance or cause false alarms.
• Is the sensor pointing toward a source of heat? Too much heat from a fireplace, direct sun, or something else can trigger an alarm.

Keep Batteries Ready And Watch Out For Low Battery Signals

One helpful aspect of new home security systems is that they’ll alert you when batteries are getting low. If your system uses a app or control panel, you’ll usually discover notifications there. Depending on your system, you may hear an intermittent beep when batteries are getting low. 

Contact sensors, smoke detectors, motion sensors, and other wireless devices have batteries that will have to be replaced every year or two. It’s a good idea to keep batteries around and create a replacement schedule. Many systems also include a rechargeable backup battery for the primary control panel. This battery helps keep your system running if your power goes out and should recharge once the electricity is working again. If it fails to recharge, you should replace it.

Troubleshooting Is Easy With ADT Home Security In Jefferson City 

As the foremost name in home security, ADT designs systems that offer unsurpassed protection and functionality. Getting into test mode is easy through the ADT+ app or MyADT.com, and you’ll always receive notifications when a battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Jefferson City home. Call (573) 200-8693 or complete our form today!